Pleated and panel filter media must remain securely bonded under continuous airflow and pressure differentials. Our epoxy and urethane adhesives bond media to metal, stainless steel, and plastic end caps and lock the pleats in place for the life of the filter.
Intake and cabin filters face heat, vibration, and constant dust. Our adhesives form a durable seal between media and frame, keeping unfiltered air from bypassing the element.
Industrial liquid filtration cartridges and pleated elements rely on seals that resist swelling and pressure. Our systems bond media to end caps and pot cartridges, preventing bypass flow.
Fuel filters demand adhesives that stay intact in direct contact with aviation fuel and hydrocarbons. Our epoxy systems keep their bond and mechanical strength where fuel exposure degrades lesser products.
Industrial coolant filtration and hydraulic elements run in oil, water-glycol, and additive-heavy fluids. Our formulations resist these fluids and keep the media-to-end-cap seal tight under sustained pressure.
Some elements need the end cap formed directly on the media rather than bonded to a pre-made cap. Our pourable systems mold the end cap, encapsulate the media, and hermetically seal the assembly in a single operation.
They bond filter media to metal, stainless steel, and plastic end caps, mold end caps directly onto the media, and hermetically seal the element, directing flow through the media while withstanding the operating environment.
The right chemistry depends on your fluid, temperature, and flexibility needs. Epoxy systems offer high strength and chemical resistance, while polyurethane systems add flexibility and impact resistance. We help identify the chemistry that best fits your filter design, operating environment, and production process.
Our systems resist water and aviation fuel and stand up well to solvents, phosphate esters, hydraulic oils, and other reagents. We match the formulation to the exact fluids your filters will face.
Yes. We formulate adhesives that join filter media to each of these end cap materials, and that mold end caps directly where your design calls for it, giving you one sealed and structurally sound assembly.
Yes. We build epoxy and polyurethane systems around your media, end cap material, operating fluid, cure profile, and production process rather than fitting your filter to an off-the-shelf product.
Yes. Our chemists work with you from formulation through validation and production, providing technical guidance, ISO 9001 quality systems, UL-recognized formulations where applicable, and the supporting documentation needed for qualification and scalability.
